WASHING MACHINE HOSES WITH A STEAM DRYER INSTALLATION KITAs pictured, the complete installation kit includes:
- Two brass “gooseneck” or 45° hose adapters, each to be coupled to the hot and cold water supply valves.
- One brass hose splitter, or wye, to be coupled to the adapter on the cold water valve.
- One 5 or 7 foot pair of color coded (same construction) Floodchek washing machine hoses, for connecting the blue (cold) hose to one side of the hose splitter and the red (hot) hose to the adapter on the hot water inlet valve, then each to corresponding inlet valves on washer.
- One single blue Floodchek hose to be attached to other side of hose splitter on cold water supply valve, then to dryer.
Gooseneck Brass Coupling 45° Adapters45° cast brass coupling adapters, used for washing machines with restricted side or rear clearance. These are also known as gooseneck brass coupling adapters and make for a perfect, clean installation behind any washer or dryer setup.
Washing Machine Washer Hose Gasket FittingFLOODCHEK Corporation is proud to present the best rubber washing machine hose gasket fittings. Custom manufactured specifically for replacing a leaking rubber washer O ring and or used washer gasket.
It is advised that if you replace your washing machine, to check closely for any damage to the washer gasket embedded in the washing machine hose itself. This is where most leaks disseminate from. Thus: replacing the washer gaskets when you remove your washing machine hose from the washer or dyer is your best peace of mind.These USA made rubber washer gaskets can also be used for your outside garden hose or any other hose of the same size. Developed with the sole purpose of preventing water damage caused every year by substandard, defective washing machine hoses and washer gaskets found within all other washing machine hoses sold in today's market place of planned obsolescence.